当前位置：网站首页 > 新闻动态
空调移机方法和步骤
添加时间：2022/1/17 14:45:00     浏览次数：
空调移机方法和步骤
Air conditioner moving method and steps
1、前期准备:移机人员上门拆机并带齐全套工具、材料及安全设备。免费检查，先报价，后维修，不维修不收取任何费用等优惠政策，彻底根除了消费者的后顾之忧，肃清了游离在行业边缘的"螺丝刀加工厂"，保护了消费者的利益，同时也给足了消费者的选择权，真正做到了客户才是上帝。
1. Preliminary preparation: the relocation personnel shall dismantle the machine on site and bring a complete set of tools, materials and safety equipment. Free inspection, first quotation, then maintenance, no maintenance, no charge and other preferential policies have completely eradicated the worries of consumers, eliminated the "screwdriver processing factory" on the edge of the industry, protected the interests of consumers, and gave consumers the right to choose. The customer is the God.
2、回收制冷剂:首先开机制冷，外机运行后收氟关闭小阀门，阀门结霜有化掉后关闭大阀门，立刻关机。拉掉电源，拧紧保险帽，使空调移机器中的制冷剂收集到室外机中去。
2. Recovery of refrigerant: start up the refrigerator first, collect fluorine after the external machine runs, close the small valve, close the large valve after the valve frosts and melts, and shut down immediately. Pull off the power supply and tighten the safety cap to collect the refrigerant in the air conditioner into the outdoor unit.
3、拆室内机:拆卸室内机时，应防止冷凝水流进线路板。
3. Disassemble the indoor unit: when disassembling the indoor unit, prevent condensate from flowing into the circuit board.
4、拆室外机:拆卸室外机时，在卸放的同时注意平衡避免振动摇晃，用塑料包好以便搬运。
4. Disassembly of outdoor unit: when disassembling the outdoor unit, pay attention to balance during unloading, avoid vibration and shaking, and wrap it with plastic for handling.
5、安装:空调重新安装时应注意安装位置与对流。用洗涤剂进行检漏，观察每一个接头有无气泡冒出，验明系统确无泄漏后，旋紧阀门保险帽即可。
5. Installation: pay attention to the installation position and convection when reinstalling the air conditioner. Conduct leak detection with detergent, observe whether there are bubbles at each joint, and tighten the valve safety cap after verifying that the system has no leakage.
上一页  拆机的步骤  
下一页  移机操作步骤