空调移机收氟方法介绍
空调移机收氟方法介绍
Introduction of fluorine collection method for air conditioner relocation
安装时，打开阀门排空如下:内外机固定后，连接空调，主要是内外机连接管紧密，注意连接，防止制冷剂泄漏。用内六角开关打开自动档空调，打开高压阀(细管阀)，用六角顶住加氟口顶针(低压加氟口)，让里面的气体跑出来，10秒左右，不要太久，以免雪种跑得太多，这样管道里的空气就可以排出。然后打开高低压阀门，连接内外机的电源线。
During installation, open the valve to vent as follows: after the internal and external units are fixed, connect the air conditioner, mainly because the connecting pipes of the internal and external units are tight, and pay attention to the connection to prevent refrigerant leakage. Turn on the automatic air conditioner with the hexagonal switch, turn on the high-pressure valve (thin tube valve), and use the hexagonal to hold the thimble of the fluorine adding port (low-pressure fluorine adding port), so that the gas inside can run out for about 10 seconds, not too long, so as to avoid too much snow, so that the air in the pipe can be discharged. Then open the high and low pressure valves and connect the power lines of internal and external machines.
